Easy dry cell charger with CMOS IC 4011

The dry cell charger circuit can be fully charged about 12 hours.When used with a 9 volt supply,the equipments in the circuit for the AA type cell.When using the C and D type cell, should reduce the value of the resistance Rx to be 68 ohms.In charge of the cell, you should not be charged to the same series, may cause cell damage is fully charged.
If the cell voltage is below 1.6 volt,The compared circuit to leave the square wave oscillator by the CMOS gate,then the transistor made a charge until the cell voltage is 1.6 volt.The comparison circuit will cut the charging LED blinks, notice prevents over-charging.

Posted in: electronic circuit